Sale
JJC MT-636 with Cable-B LCD Timer Remote for Camera Nikon D3 D4 D700 D800

JJC MT-636 with Cable-B LCD Timer Remote for Camera Nikon D3 D4 D700 D800

Brand: JJC
Product Code: 13700076
Availability: In Stock
Views: 5927
RM169.81 RM282.00
You save: RM112.19 or 40%
Qty: + -
  Add to Wish List Add to Compare
Tags: JJC MT-636 with Cable-B LCD Timer Remote for Camera Nikon D3 D4 D700 D800
The JJC MT-636 Multi-Exposure Timer & Infrared Remote is a remote switch inbuilt self-timer, interval timer, multi-long exposure timer, and exposure-count setting features. What’s more, this remote has inbuilt infrared code for CANON, NIKON, SONY, OLYMPUS, PENTAX, SAMSUNG cameras. It can trigger the camera either wired or wireless. So it is a good way to prevent camera shake, this is perfect for taking long exposure photos. The timer can be set anywhere from 1 second to 99 hours, 59 minutes, 59 seconds. A dial enables you easily enter the numeric settings with a single thumb. The LCD panel can also be illuminated. All these features make it good for time-lapse photography.
 
Features
- Delay Timer: 99 hours, 59minutes, 59seconds
- Interval Timer: 99 hours, 59minutes, 59seconds
- Exposure Counter: 999 shoots or unlimited
- Multi-Exposure Timer: up to 9 different exposure timer groups
- Inbuilt infrared code for CANON, NIKON, SONY, OLYMPUS, PENTAX, SAMSUNG cameras
 
Timer Functions
- You can set the timer delays, multi-exposure times, and intervals up to 99 hours, 59 minutes, 59 seconds in one second increments.
 
Exposure Function
- MT-636 enables you to select anywhere from one to 999 continuous shots, or you can set the device to take an unlimited number of photos.
 
Multi Exposure Timer
- MT-636 enables you to set up to 9 different exposures time in one setting, let you can easy find out which is your best exposure time for your shooting.
 
LCD Display
- The backlit LCD display panel gives you a visual reference so you can enable the following functions: self-timer, exposure, interval, and number of shots. It also act as a status indicator for battery life, timer functions, lock indicator, number of shots, and more.
 
Audible Beep
- MT-636 will give you an audible beep for the last three seconds of a countdown delay or interval. It will also beep to confirm your settings. The beep can be turned off if necessary.
 
Long Battery Life
- Powered by two "AAA" batteries, it can last for about 2 months.
 
Specification:
 
Dimensions: Approx 110 × 45 × 22mm
Weight: Approx 72g
Battery Type: 2 AAA batteries / LR03 alkaline batteries
Operating temperature: -20 to +52°C
 
Timer Functions
You can set the timer delays, multi-exposure times, and intervals up to 99 hours, 59 minutes, 59 seconds in one second increments.
Exposure Function
MT-636 enables you to select anywhere from one to 999 continuous shots, or you can set the device to take an unlimited number of photos.
Multi Exposure Timer
MT-636 enables you to set up to 9 different exposures time in one setting, let you can easy find out which is your best exposure time for your shooting.
LCD Display
The backlit LCD display panel gives you a visual reference so you can enable the following functions: self-timer, exposure, interval, and number of shots. It also act as a status indicator for battery life, timer functions, lock indicator, number of shots, and more.
Audible Beep
MT-636 will give you an audible beep for the last three seconds of a countdown delay or interval. It will also beep to confirm your settings. The beep can be turned off if necessary.
Long Battery Life
Powered by two "AAA" batteries, it can last for about 2 months.
 
Inbuilt infrared code
For CANON, NIKON, SONY, OLYMPUS, PENTAX, SAMSUNG cameras
 
Since our MT-636 does not provide a shutter release cable, you will need to to purchase a JJC cable to fit your camera. If you have two cameras or above, you will just need to purchase different cables to use them with our MT-636 and your cameras, thus saving the cost after purchasing our MT-636.
 
Cable-B replaces NIKON MC-30 / MC-36 / MC-36A
 
JJC Cable-B Connecting Cord for Remote Control
Camera connecting cord for JJC remote controls with 2,5mm socket
This cable allows you to connect miscellaneous JJC remote controls to the remote socket of compatible cameras. The cords fits for the HR remote handle grip as well as for JR series and MET series remote controls. But it does not fit for JJC JM series devices.
 
The camera release cable is a 3 'coiled interface cable that with all of JJC modular remote versions works. 
Use it as a spare or for the functionality of the JJC camera remotes and flash trigger system or the JJC remote handle Pistol Grip add.
 
Fit For:
Nikon D810 D4s F5 D4 D800 D300s D3s D3x D700 D3 D300 D2Xs D2x D200 F90x F6 D1h D2H D100 D1x D1 F90 F100 
 
Compatibility :
Nikon D800, D800E, D700, D300,  D300S, D200, D100 (battery grip  required), D4, D3s, D3X, D3,  D2X, D2Xs, D2H, D2Hs, D1X, D1H,  D1 
Nikon F6, F5, F90X, F100, MC-30 
Fuji S3 Pro, S5 Pro; Kodak DCS  Pro
 
Specification:
Length: approx. 26cm (unextended)
Plugs: 2,5mm phone jack (3-pole), camera specific plug 
 
Package included :
1 x Lcd Timer Remote
1 x Cable-B Cord Shutter
 
 
 
Product Code 13700076
Warranty Period  one years
Warranty Type  Manufacture